ITServices
Queen's UniversityWindows Vista - QueensuSecure_WPA2
Note: If you are having trouble configuring a wireless connection please drop by the Learning Commons Desk, located on the ground floor of Stauffer Library, for help.
Before you configure your connection
Go to https://eservices.queensu.ca/apps/mynetid/ and log in to check your status. This is a one time step only and must be completed by AllStudents, Faculty and Staff.
Configure Your Connection
Click on the Start button and select
Connect To.
2. The Connect to a network screen will open.
- Click on the Set up a connection or network link at the bottom of the screen
3. The Choose a connection option screen will open.
- Select Manually connect to a wireless network
- Click the Nextbutton
4. The Manually connect to a wireless network screen will open.
- In the Network name: box enter QueensuSecure_WPA2
- From the Security type: drop down menu select WPA2-Enterprise
- From the Encryption type: drop down menu select AES
- Checkthe box Start this connection automatically
- Click the Nextbutton
5. The Successfully added QueensuSecure_WPA2 screen will open. Your connection has been added but now you need to configure it.
- Click the Change connection settings
6. The QueensuSecure_WPA2 Wireless Network properties screen will open.
- Check the box Connect automatically when this network is in range
- Check the box Connect to a more preferred network if available
- Click the Securitytab
7. On the Security tab select:
- Security type: drop down menu select WPA2-Enterprise
- Encryption type: drop down menu select AES
- Choose a network authentication method: drop down menu select Protected EAP (PEAP)
- Check the box
Cache user information for subsequent connections to this network.
Note: If this computer is used by more than one person, or you use additional NetIDs do not check this box. - Click the Settings...button
8. The Protected EAP Properties screen will open
- Uncheck the box Validate server certificate
- Check the box Enable Fast Reconnect
- Click the Configurebutton
9. The EAP MSCHAPv2 Properties screen will open
- Uncheckthe box beside Automatically use my Windows logon name and password (and domain if any)
- Click the OKbutton
10. The Protect EAP Properties screen will re-open. Click OKto close it.
11. The QueensuSecure_WPA2 Wireless Network properties screen will re-open. Click
OKto close it.
12. Your wireless connection is now ready to use. You should be prompted to log in
- Click on the dialogue box. The log in window will appear.
To Connect to the Wireless Network
The Enter Credentials screen will be displayed.
- Enter your NetIDand password
- Do not enter anything in the Logon domain:
- Click the OKbutton
- You will be connected to the Queen's Wireless Secure network
To log out of the Wireless network
Go to the Startmenu
- Select Connect To
2. The Connect to a network screen will open.
- Click on the QueensuSecure_WPA2connection to select it
- Click the Disconnectbutton at the bottom of the screen
Copyright Queen's University
Kingston, Ontario, Canada K7L 3N6 613.533.2000